Application

To switch high power, and usually be used in the following:

• Single phase prepaid electricity meter with IC card
• Collective electricity meter reading system
• Some kinds of home-hold electronic appliance
• Some automatic controller (such as light controlling system)

Work principle

latching relay is a type of dual-stable-state magnetic hold relay which only requires power to switch the contact. The relay will keep contact or break off contact if there is a direct sufficient pulse voltage applied to the coil. Then there is not the requirement of power supply on the coil, because the on or off position of the contact can be kept by the magnet force.

Product features

• No power consumption in the hold position. Low power consumption on the driving coil
• High contact force with low contact resistance
• Small size with reasonable structure
• High resistance to vibration and shock
• High power can be cut and be available to work under heavy load
• Using for low frequency switch action
• High quality silver alloy for contactor

Additional Information ( FOR SINGLE PHASE)

• 5-16A, 30A, 50A, 60A, 80A, 100A, 200A
• 9V 12V pulse voltage available, 5V, 24V could be developed
• VDE, CCEE ,ISO9001 certificate

Specification

SH807

Feature

• High switching capacity 1A:10A 250VAC;2A,1X(1A + 1B):8A 250VAC
• High sensitivity: 200mW
• 4kV dielectric strength (between coil & contacts)
• Single side stable and latching types available
• 1 Form A, 2 Form A and 1X(1A + 1B) contact arrangement
• 1 Coil Latching or 2 Coil Latching or single side stable
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 20.0 x 15.0 x 10.2mm

SH808

Features

• Latching types available
• High sensitivity
• High switching capacity 1A:8A 250VAC;2A,1X(1A + 1B):5A 250VAC
• 1 Form A, 2 Form A and 1X(1A + 1B) contact arrangement
• 1 Coil Latching or 2 Coil Latching or single side stable
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 20.2 x 11.0 x 10.4mm

SH809

Features

• 60 A switching capability
• 4KV dielectric strength (between coil and contacts)
• Heavy load up to 15000VA
• 1 Coil Latching or 2 Coil Latching
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 38.0 x 30.0 x 16.0 mm

SH810

Features

• Motor load up to 5Hp
• Inrush current up to 170A
• Creepage distance: 8mm
• Dielectric strength: more than 4000VAC (between coil and contacts)
• Sealed IP67 and flux proof types available
• Manual switch function available
• 1 Coil Latching or 2 Coil Latching
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 39.0 x 15.0 x 30.2mm

SH811

Features

• 90 A switching capability
• 4KV dielectric strength (between coil and contacts)
• Heavy load up to 22.5kVA
• 1 Coil Latching or 2 Coil Latching
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 38.0 x 30.0 x 16.9 mm

SH812

Features

• 100 A switching capability
• 4KV dielectric strength (between coil and contacts)
• Heavy load up to 27.7kVA
• 1 Coil Latching or 2 Coil Latching
• Environmental friendly product available (RoHS compliant)
• Outline Dimensions: 52.0 x 43.0 x 22.0 mm